ELECTRONAUTICS
Service · cable trays
Trays and supports.
We install cable trays and supports across all decks, to the drawings and securely fixed.
Marine electrical work for shipyards, shipowners and electrical contractors The team is ready. Your ship can come in.
Electrical installation on board: cable trays, cable pulling, termination, testing and commissioning. As a work package or as staff, from Hamburg and Lübeck.
For buyers · at a glance
What you need to know.
The key facts for your supplier assessment. We will send you certificates and credentials on request.
250+
Skilled workers
Electricians, electronics technicians, engineers and site managers for shipyards, shipowners and industry.
Engineers
30+
For technical coordination with the shipyard and questions on site.
Site managers
20+
They lead the teams on board and are your point of contact on site.
Navy
100+ with Ü2
Employees with Ü2 security clearance for naval projects.
Quality
ISO 9001 · ISO 14001
Quality and environmental management.
Staffing
AÜG licence
Temporary staffing for shipyards, electrical contractors and industry.
Special cables
FO · HV · coax · CAT7
Terminated and tested by our own people, with test reports. Fibre optic with OTDR, high voltage including HV test.
Naval work
Shock · S+E · BV 3400
Shock mounting, S+E special connectors and marking to BV 3400.
Welding on board
EN ISO 9606-1
Certified welders for cable trays, penetrations and earthing studs.
Services
What we do on board.
01
Cable trays and cable pulling
Trays and supports, long-run and local cable pulling. Each cable laid individually, fixed and marked.
02
Termination and commissioning
Termination at main switchgear and distribution boards, testing with test reports, commissioning and acceptance.
03
Special cables
Terminated and tested by our own people: fibre optic with OTDR, high voltage including HV test, coax and CAT7.
04
Navy
Shock mounting, S+E special connectors and marking to BV 3400. With Ü2-cleared staff.
05
Welding on board
Supports for cable trays, penetrations and earthing studs, by certified welders to EN ISO 9606-1.
06
Staffing
As a work package or as temporary staffing, for shipyards, electrical contractors and industry. With an AÜG licence.
On board
From cable tray to acceptance.
Service · cable pulling on board
Every metre counts.
Cable pulling, fixing, marking. Each cable laid and labelled individually, fibre optics tested with OTDR.
Service · switchgear termination
Connected. Measured.
Every outgoing circuit labelled, every measurement in the test report.
Service · commissioning and acceptance
Switched on. Signed off.
We commission the system together with the shipyard and class. Every test goes into the report.
High voltage · terminated in-house
High voltage. In three steps.
We terminate high-voltage cables ourselves. First connect, then test, then energise. Every step recorded.
01 · Connect
The high-voltage cables are fitted with their terminations, then landed and tightened in the switchgear panel.
02 · Test
The HV test comes before energising. The area is cordoned off and the readings go into the test report.
03 · Energise
Energising is done in protective equipment. The panels show they are in service, and the test report is complete.
Refit · Navy · fibre optics · megayacht · ashore · offshore
Here too, we are on board.
Service · bridge refit
Old kit out. New kit in.
Bridge refit: the old system comes out, new cables are laid, connected and tested. The equipment is supplied by the manufacturer or the shipyard.
Navy · access with clearance
Access with Ü2 only.
More than 100 of our employees hold Ü2 security clearance. We carry out shock mounting, S+E special connectors and marking to BV 3400 ourselves.
Service · fibre optics
Spliced. Measured.
We splice fibre optic cables on board and measure every fibre with OTDR. The result goes into the test report.
Megayacht · before interior fit-out
Before that, we were everywhere.
Cable trays, cable pulling, termination and testing. Behind deckheads and panelling, before the interior fit-out closes them up.
Ashore · shipyard and industry
Ashore too. Halls under power.
We do not only work on board. We also carry out the electrical installation in industrial halls and workshops: cable trays, lighting, sub-distribution boards.
Offshore · converter platform
For the energy transition.
Power from the sea. The electrics of these platforms are installed at the shipyard, and we are on board there too.
Credentials · certificates and approvals
Audited. Approved. Engraved.
ELECTRONAUTICS GMBHElectrical engineering on board · Hamburg · Lübeck
- Quality
- DIN EN ISO 9001:2015Normec VQZ · Reg. no. 12765-3606
- Environment
- DIN EN ISO 14001:2015Normec VQZ · Reg. no. 12765-3607
- Staffing
- Licence for temporary staffing (AÜG)German Federal Employment Agency
- Trade
- Master craftsman's business (Meisterbetrieb)Electrical engineering
ISO valid until 12/2028 · Scope: cable laying, installation of electrical systems, maintenance and repair, temporary staffing of qualified electrical workers. We will send you the certificates on request.
Process · five steps
From cable list to handover.
- 01
Enquiry and clarification
You send the scope, drawings or cable list. We clarify what is needed.
- 02
Team and clearances
We put the team together, with Ü2-cleared staff for naval projects.
- 03
Installation on board
Trays, cable pulling and termination. With site managers on the job.
- 04
Testing and test report
We measure every run, fibre optics with OTDR. Every measurement goes into the test report.
- 05
Commissioning and handover
Joint acceptance. You receive marked cables and all test reports.
Sectors
One contact for every ship.
Questions from buyers
Quick answers.
What shipyards, shipowners and electrical contractors want to know before placing an order.
01What electrical work do you carry out on board?
From cable tray to acceptance: cable trays and supports, cable pulling, termination at switchgear and distribution boards, testing with test reports, and commissioning. Plus special cables such as fibre optic, high voltage, coax and CAT7, naval work and welding on board.
02Turnkey work package or staffing?
Both. We deliver a clearly defined scope as a work package, with our own team and our own site managers. If your team needs reinforcement, we provide electricians through temporary staffing. We hold an AÜG licence.
03What ships do your teams work on?
Cruise ships, naval vessels such as frigates and corvettes, megayachts and container ships, as well as RoRo and RoLo vessels, ferries and research vessels. We also work on offshore projects and industrial plants ashore, on newbuilds and refits alike.
04What credentials do you hold?
ISO 9001 and ISO 14001, the licence for temporary staffing, master craftsman's business (Meisterbetrieb) in electrical engineering, and welders qualified to EN ISO 9606-1. More than 100 employees hold Ü2 security clearance. We will send you certificates on request.
Contact
Project on board? Get in touch.
Phone · Hamburg and Lübeck+49 451 20271623Call directly →
Electronautics GmbH · Seelandstraße 1 · 23569 Lübeck